Utilize a Pneumatic Forklift
You can often find pneumatic forklifts in shipping and warehouse operations. Also called pump trucks or pallet trucks, they are utilized in order to transport materials and things around on wooden pallets utilizing metal forks which are mounted on a wheeled counterweight. The counterweight has a pump which could lift the forks off the ground. A pallet truck is intended to be operated by a single person.
Pallet trucks must be operated with care to avoid loss of control while lifting heavy loads. Machine should be inspected prior to operating. Clear the wheels area of any obstructions. Make certain that the handle smoothly turns. The pallet must be carefully stacked to guarantee that nothing will fall off during transportation.
On the end of the pallet truck's handle, squeeze the level found on the inside of the metal loop to be able to release the air in the pump and lower the forks. The forks can then be pushed into the slots of the pallet. The forks must be centered to ensure equal distribution of the pallet's weight across them. Raise the forks from the ground by pumping the handle of the pneumatic lift until the pallet has fully cleared the ground. Do not lift the pallet too high or the forklift could unbalance.
Move the pallet by pulling on the handle and then dragging it behind you. It is really dangerous to push the pallet in front of you since the momentum could cause it to go out of control. Slowly take turns and don't try to stop abruptly. Stop gradually, squeeze the lever, and the forks would lower to the ground. Lastly, remove the forks from the pallet by pulling them out. Return the pallet truck to its permanent location.