Change a Propane Tank
Forklifts fueled by propane are common in warehouse settings. These forklifts have a propane mount located behind the driver. These tanks have to be replaced every so often since they have limited lifespans. Forklift drivers should utilize care when handling propane tanks. Compressed gases are really dangerous, particularly because the gas is flammable. Use care when replacing and removing propane tank to prevent being injured.
1 If there is a need to change the propane tank, the first step is to stop the forklift, then turn the tank valve off. The forklift must be left on until the engine dies. This procedure burns off the gas in the transfer hose which connects the tank and the engine. Before taking the next steps, put on the proper safety equipment, like for example insulated gloves made of either leather or neoprene. It is vital for you to protect your skin from contact with the compressed gas, which is extremely cold.
2 Disconnect the hose from the tank and take off the holding straps to remove the tank. When putting in a new tank, tighten the nut to reconnect the holding straps and to reconnect the hose at the valve of the tank.
3 Leaks can be checked simply by applying soapy water to the valve and opening it slightly. If there is a leak, it will cause bubbles to froth from around the valve. If this happens, inspect the valve area and the connection hose at the nut. Re-tighten the connecting nut if you detect any leaks in the area of the valve, and after that perform the leak inspection procedure all over again. Persistent leaks mean that both the nut and connecting hose would need to be replaced. Nevertheless, if replacing the hose and nut still does not stop the leak, the tank will need to be replaced.
4 Open the valve all the way to allow the gas to fill the connecting hose. Afterward you could start the lift truck and resume working.