In the majority of cases, most individuals spend quite a lot of money purchasing their forklift. Hence, it is really important to take proper care of it in order to protect your investment well into the long run. It is a good idea to know the procedures which are carried out in the care and maintenance of this piece of machine.
Amongst the best ways to tell how good the engine is working is by starting the lift truck up and listening closely to see how it works. For instance, if there are any misses or knocks, the machinery is faulty and this should raise some issues. Furthermore listen carefully for any squealing sounds which come from the belts because these noises will provide you with a wealth of information.
When performing maintenance, some of the main parts you would have to pay attention to include the safety warning devices, horn, the overhead guard, the lights and the gauges. Any faulty components or burnt out light bulbs should be replaced as soon as they are noticed. It is also vital to check the wiring.
The battery compartment terminals must be cleaned when the above parts have been inspected thoroughly. If the terminals are not clean, be sure to clean them well. Each and every battery cell should be checked in order to ensure the fill level is topped up to the regulated amount.
The next step is to drain all of the oil out of the machine and then change the filters. The fuel filters, hydraulic filter and the transmission filter must be replaced regularly. Prior to fitting them, be sure to write the date on the new filters by using a permanent marker to be able to keep track.
Once the oil change has been carried out and new filters have been fitted, visually check the drive axle from underneath the machine. Be certain to grease the axle if there is any grease fitting. Check the belts on the engine for any cracks or frays. If you find any, fix the issue accordingly. Then, check every other component of the machine like the wheels. If any kind of fault or concern is detected, be sure to deal with it immediately so as to make certain the machinery is running at its safest and optimum levels.